TRACK END PLATE LINKS
Available to suit Clark 24mm or 28mm track repair links, end links can be welded onto the tracks of any make or model during refurbishment.
FITTING STAPLES
Fitting staples make forest track tensioning even easier. Used in line with the Quickie Track Tensioner, these devices hold the forest track in the correct position for fitting to the machine.
FITTING STAPLES
| X | Y | Z |
|---|---|---|
| 50mm | 50mm | 17mm |
| 50mm | 40mm | 25mm |
| 50mm | 50mm | 25mm |
| 50mm | 60mm | 25mm |
| 50mm | 40mm | 32mm |
| 50mm | 50mm | 32mm |
| 50mm | 60mm | 32mm |
| 50mm | 70mm | 32mm |
HAGGIS LINK
- Available 24mm and 28mm links
- Bearing surfaces matched
- Maximum contact area
- Reduced wear and contact pressure
- Protects C-Link from premature wear
- Less maintenance and downtime
- Less re-tensioning and adjustments
- Specially designed flanges inhibit link twisting
QUICKIE TRACK TENSIONER TOOL QTT400
For fast, easy tensioning this tool fits most types of forest tracks. Adjustment is via a 3/4” drive ratchet and 38mm socket onto the end nut (not supplied).
TRACK TENSIONER TOOL QTT401
The QTT401 is a specially extended variant of the robust QTT400. The extended fork legs allow the tensioner to be engaged on the inside of the track links. This is beneficial where a QTT400 is not able to be used due to space constraints or where the track plates have been extended (e.g. TXL).
TRACK TENSIONER TOOL – QTT402
For single wheel tracks (GSG tracks) the QTT402 features high strength pins to engage the tracks and tension with ease.
TRACK JOINING LINK –
JL 24-95, 28-105
Available in 24mm and 28mm diameter sizes, Clark Track Joining Links are designed for ease of use. Forged from heat treated boron alloy steel for maximum hardness and strength, these links combine one bolt locking with smooth tyre friendly profiles.
The new 24mm and 28mm Links combine bolt head locking, for single spanner tightening, and a new tapered locking tongue design.
TRACK JOINING LINK –
JL 24-160, 28-160
Available in 24mm and 28mm diameter sizes, Clark Track Joining Links are designed for ease of use. Forged from heat treated boron alloy steel for maximum hardness and strength, these links combine one bolt locking with smooth tyre friendly profiles.
The new 24mm and 28mm Links combine bolt head locking, for single spanner tightening, and a new tapered locking tongue design.
NISULA
TENSIONER
As an alternative to the QTT tensioner, there is also a conventional mid-mounted tensioner.
TRACK JOINING LINKS
- LTX30037 Lock 22 x 90 mm
- LTX30039 Lock 22 x 165 mm
- LTX30040Lock 22 x 210 mm
- LTX30041 Lock 26 x 100 mm
- LTX30043 Lock 26 x 170 mm
- LTX30044 Lock 26 x 220 mm
- LTX30045 Lock 30 x 100 mm
- LTX30047 Lock 30 x 170 mm
- LTX30048 Lock 30 x 220 mm
TRACK TENSIONER TOOL LTT
- LTX-20012
FITTING STAPLES
Fitting staples make forest track tensioning even easier. Used in line with the Quickie Track Tensioner, these devices hold the forest track in the correct position for fitting to the machine.
LINK-HOOK
- LTX40069 20x50x220mm
- LTX40070 20x50x200mm
- LTX40071 15x45x150mm
LINKS
- LTX40068 LI22 d22mm
- LTX40067 LI26 d26mm
- LTX40066 LI30 d30mm
WELDABLE JOINING LINKS
- LTX40058 30x100mm
- LTX40059 26x95mm
- LTX40060 22x90mm
SPIKES
- LTX40052 40x50x95mm
- LTX40053 40x50x65mm
- LTX40054 40x50x50mm
- LTX40055 30x50x50mm
- LTX40056 20x50x50mm
- LTX40057 20x35x50mm
TIRE GUIDES
- LTX40072 170x90mm
- LTX40073 140x90mm
- LTX40074 110x70mm
LOCKING JOINTS
- LTX40063 Locking joints-30mm
- LTX40064 Locking joints-26mm
WELDABLE BARS
Weldable bars (hardened 58-60HRC) for better traction between tires and track plates.
OFA original premium quality parts helps you to modify, repair, adjust tire chains. OFA tools are constructed to assist mounting and unmounting tire chains.
Lintexon proudly offers OFA chains, a hallmark of quality and durability in the world of tire traction solutions. Crafted by the Nordic Traction Group, these chains are designed in Finland using special Boron alloy steel, ensuring unparalleled strength and longevity.
FASTENERS
Inside fastener for truck chain. Outside fastener for truck chain fits all OFA truck chains. Fastener no 8 is used with tractor chains with 8 mm gauge side chains (tread chains 8 mm and 9 mm). Fastener no 10 is used with our tractor chains with 9 mm- gauge side chains (tread chains 11 mm).
HOOKS
Hooks are used to connect the traction tread surface (cross-pieces) to the side chains. The gauge of the side hooks is generally the same as that of the tread chains. Gauges: 8 mm, 9 mm and 11 mm.
LINKS
Connecting links are used to fasten traction tread surfaces together. By adding several connecting links, you can also increase the length of the chain. The gauge of connecting links is larger than that of the tread chain. So for example, with a 9 mm chain, the connecting links are 10 mm. Available in 8, 9, 10 and 13 mm gauges.
PLUG COUPLERS
Plug couplers are used to connect tread surfaces. They are also suitable for use as repair parts for particularly thick chains (forestry chains). They are durable and easy to use. Available in 5 mm, 6 mm, 8 mm, 10 mm, 13 mm and 16 mm gauges.
SHACKLE
Shackles are the all-purpose spare part for users of traction chains. It’s worth having some available when using the chains. Use the shackles to connect and repair chains quickly, and avoid wasting time with machines and equipment standing idle. Available in 6 mm, 8 mm, 10 mm, 12 mm and 14 mm gauges.
TOOLS
CHAIN TENSIONSERS are used when installing or adjusting heavy traction chains. They are ‘extra hand’ with plenty of power during the installation. Tool for DEMOUNTING OF PLUG COUPLING no 13 and 16 HOOK PLIERS are used to open and close hooks on chains or sections being repaired. EasyFit Single and EasyFit Dual truck chain mounting tools for tire dimensions 295/80-22.5 and 315/80-22.5.